3 Results for the search " normal":
Author: e.malaval
Type: Model
Downloaded: 37 times
Date: 2022-01-19
Normal random number generator
Description:
This device produce periodically a number randomly with a normal law. To generate it, it uses the Box-Muller methods. To generate the necessary uniform distributions, it uses the park and Miller metho... see mored.
seed: The seed represents the seed of the generator. A same seed will produce the same set of number.
Ts: At each time step of Ts, the random number generator will compute another random number.
variance: The variance represents the law variance.
Author: AdminEMTP-RV
Type: Document
Downloaded: 912 times
Date: 2012-06-18
Look what happens without EMTP-RV
Description:
This is a nice video about the switching of a shunt reactor (most probably 500 kV) with a Circuit-Switcher.
>A circuit-switcher is a SF6 load-break swith with no fault current breaking cap... see moreability. The load current, in this case around 150 A, is normally interrupted first by the 2 interrupters and then the disconnect will open to isolate the reactor.
What happened in this video:
1 - During the opening, an external flashover occurs on one of the chamber most probably because of the contamination;
2 - The other chamber can not withstand the whole voltage and reignites internally;
3 - The external flashover vanishes because an arc is established inside;
4 - The disconnect opens on the full load current;
5 - The arc burns freely in the air for some 10 seconds until it is self-extinguished or eliminated by a circuit-breaker operation.
Author: AdminEMTP-RV
Type: Model
Downloaded: 193 times
Date: 2012-06-18
TCR1
Description:
Example of single phase Thyristor Controlled reactor using TACS control devices. This circuit reproduces the TCR case presented in the EMTP Workbook volume 4 chapter 6.
Example of single ph... see morease Thyristor Controlled reactor using TACS control devices. This circuit reproduces the TCR case presented in the EMTP Workbook volume 4 chapter 6.
The basic static Var system consists of a static switch in series with an inductor. This is normally called a phase controlled reactor, or Thyristor Controlled Reactor (TCR). The TCR is in parallel with a fixed capacitor. Together they interface with the power system at some interconnection point. The control circuit of the TCR can be divided into three parts. There is the gate pulse generator (GPG), the heart of the control system, a voltage regulator and an interface to the power systems which could be simply a RMS voltage meter.
The purpose of the gate pulse generator is to provide firing pulses to the thyristors. The regulator calculates the conduction angle, ?, which is passed to the gate pulse generator as a control signal. It is the function of the gate pulse generator to generate the correct firing pulses to achieve the requested conduction angle, ?. In this example the gate pulse generator is modeled using TACS control devices.
Tag(s): Power Electronics